Products from emc-direct
No results were found for the filtering!
Clamp for cable tray metal
Clamp for cable tray metal is made of steel sheet and suitable for our hot-dip galvanized cable trays. They have a non-electrolytic metallization and have an aluminum-zinc coating of 5-15 µm (equivalent hot-dip galvanized). The clamp is...
Content
50
from €64.58
*
Cover for cable trays hot galvanized
Our covers for cable trays in hot-dip galvanized are suitable for our hot-dip galvanized cable trays. The covers are made of sheet steel and are hot-dip galvanized according to the CSN EN ISO 146 standard. Application temperature:...
Content
4
from €62.61
*
Cable tray sendzimir galvanized
The cable tray is sendzimir galvanized according to the standard EN 10346, EN 10143. The average thickness of the zinc layer corresponds to 15-27 µm. Spring steel clips are used to stabilize the integrated connection. To protect the...
Content
2
from €26.72
*
Pressed cable lugs aluminum-copper (AL/CU)
The aluminum-copper (AL/CU) compression cable lugs are for mounting AI cables on CU rails. The production of the compression cable lugs is carried out by means of friction welding. A corrosion-free connection technology is made possible...
Content
10
from €137.09
*
PE-HD TelePipe
The PE-HD Telo Pipe is a cable protection pipe for laying fiber optic, data and telecommunication cables. The cable protection pipe has a 2-rib system, so the total contact area between pipe and cable is extremely reduced compared to...
Content
100 Meter
€838.95
*
Quick coupling for HDPE telescope pipe
Quick coupling for HDPE telescope pipe Use a quick coupling to connect PE-HD cable protection pipes. Thanks to insertion depth marking, a pressure-tight connection of PE-HD cable protection pipes is guaranteed. Technical data: Material...
Content
68 Stück
(€46.72 * / 100 Stück)
€31.77
*
Pipe plug for HDPE telescope pipe
Pipe plug 50 mm for HDPE telescope pipe Technical data: Material: PE-HD (Polyethylene high density) Ambient temperature range -40 °C to +90 °C
€16.07
*
Cable tie with fixing eye
Cable tie with fixing eye, approx. 150x3,6 mm natural - PA 6.6
Content
100 Stück
(€111.30 * / 1000 Stück)
from €11.13
*
Cable tie Labeling field above the latch
This high-quality, halogen-free cable tie with labeling field is particularly suitable for applications where cables need to be identified at a glance. Regardless of the system according to which, for example, bundles or cable conduits...
Content
100 Stück
(€31.60 * / 1000 Stück)
from €3.16
*
Mowing edge protection 83 x 4.0 mm
Our snap-together mowing edge protector is made of high-density polyethylene (PE-HD) and consists of a top and bottom shell. It is the perfect solution for protecting cables that run from the ground to the solar array from damage and...
from €31.71
*
Mowing edge protection 110 x 5.0 mm
Our PE-HD mowing edge protector is specially designed to protect cables from damage and wear caused by mowing the surrounding lawn. The mowing edge protection consists of an upper and lower shell that are easily plugged together. This...
from €34.72
*
Mowing edge protection 120 x 5.0 mm
Our PE-HD Mowing Edge Protector is the ideal solution for protecting cables on lawns. Made of high-density polyethylene, the mowing edge protector provides a sturdy and durable cover to protect delicate cables from damage and wear caused...
from €42.48
*
Mowing edge protection 160 x 9.5 mm
Our mowing edge protector is specifically designed to protect cables that run from the ground to the solar array. These cables are often hard to see and can be easily damaged by lawn mowing. With our product, you can be sure that your...
from €63.01
*
Mowing edge protection 58 x 4.0 mm
Protect your solar park equipment from damage and abrasion caused by lawn mowing with our PE-HD snap-together mowing edge protector! This product consists of a top and bottom shell that can be easily joined together to create a sturdy...
from €29.95
*
Y-connector in various nominal widths
For cable bundling from different directions we recommend the Y-connectors for corrugated tubes. Due to the fasteners they offer a secure hold and are available in various sizes. As an alternative with 90° angle there are also our...
Content
1 Stück
from €0.40
*
PV-MS Stäubli assembly wrench set
The Stäubli PV-MS assembly tool is used for assembling, countering and loosening plug connections of the MC4 connectors. The plastic assembly wrench set consists of two assembly wrenches. One side of the assembly tool is used to loosen...
€8.81
*
Cable tie Tefzel® / ETFE
For use under extreme temperatures up to 150 °C, we recommend these highly heat-resistant cable ties made of E/TFE. The Tefzel® cable ties are also characterized by excellent chemical resistance, as well as their resistance to radiation....
Content
10 Stück
(€137.40 * / 100 Stück)
from €13.74
*
Flame resistant cable ties
Our special, flame-resistant cable ties made of polyamide 6.6 are designed for extreme operating temperatures. The excellent flame resistance of the cable ties is UL certified (UL 94 V-0) and ensures that these special cable ties can be...
Content
100 Stück
(€25.00 * / 1000 Stück)
from €2.50
*
Corrugated pipe PVC - 320N unslotted
Corrugated pipe / corrugated hose PVC - 320N for flush-mounted / cavity wall. Flexible corrugated pipe made of PVC for light compressive stress, flame retardant. Use for flush-mounted and cavity wall installations. Material: PVC Temp...
Content
50 Meter
(€53.52 * / 100 Meter)
from €26.76
*
Metal solar cable clips
Our special dual cable clips are robust, high quality workmanship and versatile. It is used to attach power cables of 5 - 7 mm to solar panels of 1.5 - 2 mm. The edges of high-strength steel are rounded to prevent damage to the cable...
Content
100
from €95.15
*
Omega cable clip
Our special Omega clips in the UV weather-resistant version hold your cable bundles reliably and securely on the substructures of solar systems. They are suitable for installation on profile grooves made of zinc and aluminum, for...
Content
100
from €22.61
*
Stäubli MC4 connector PV-KST4-EVO 2/6I-UR
The Stäubli MC4 connector PV-KST4-EVO 2/6I-UR is a high quality, internationally certified photovoltaic connector suitable for DC 1500 V (IEC, JET), DC 1500 V (UL). Thanks to the MULTILAM technology from 2004, the connector is UV and...
from €1.69
*
Stäubli MC4 socket PV-KBT4-EVO 2/6I-UR
The Stäubli MC4 socket PV-KBT4-EVO has been specially developed for use in photovoltaic systems and meets the highest quality standards. The MULTILAM technology is UV and ammonia resistant as well as IP68 against water and dirt. Thanks...
from €2.23
*
Stäubli MC4 connector PV-KST4/6I-UR
The MC4 connector PV-KST4/6I-UR from Stäubli is a solar connector for photovoltaic systems. The PV connector is a proven connector with over 15 years of field experience. The housing is including crimp contact for solar cables 4 - 6 mm²...
from €1.59
*